Table of Contents
Advertisement
®
AVerMedia
AVerTV Box
Connecting a Video Source
Composite Video: Connect a video
cable (not supplied) to the video out
of the video device and to the
AVerTV Box VIDEO IN port.
Connect an audio cable to
the left & right audio out of
the video device and to the AVerTV Box left & right AUDIO1 IN ports.
S -Video: Connect an
s -video cable (not supplied)
to the s-video out of the video
device and to the AVerTV Box
S-VIDEO IN port. If your video
player supports s-video, use
this type of connection as
s-video provides better
picture quality than
composite video.
Analog Composite Video (Y,P
Connect the analog composite video
cable (not supplied) to the Y,P
the video component source and to the AVerTV Box Y,P
If you are using the Video2, S-Video or Analog composite video (Y,P
the audio must be connected to the AUDIO2 IN port.
Connecting to a Video Output Device
You can output the video
signal from your TV
antenna or video source
(like the camcorder) to a
receiving device. The receiving
device can be a TV monitor, VCR,
video capture card, etc. Simply
connect the receiving device to the
AVerTV Box VIDEO OUT port and left & right AUDIO OUT ports.
NOTE : The AVerTV Box provides composite video output only.
6
Video & Audio Cable
(not supplied)
Example:
Video Game
(e.g.
Nintendo, Sega,
Camcorder
Dreamcast, & PlayStation2)
To S-Video Out of Video Source
VCR
,P
):
B
R
,P
out of
B
R
Video & Audio Cable
Example:
Video Game (e.g.
Camcorder
®
Sega, Dreamcast,
& PlayStation2)
To Video Out and Left/Right Audio Out
of Composite Video Source
VCR
®
®
®
S-Video Cable
(not supplied)
Example:
DVD Player
Analog Composite Video Input
(not supplied)
,P
port.
B
R
Example:
Television
Video Capture
Card
(for recording)
To Video In and Left/Right Audio In
of Composite Video Source
®
N i n t e n d o ,
®
,P
),
B
R
VCR
Advertisement
Table of Contents
