Table of Contents
Advertisement
Changing the Display Mode
Channel Presetting
There are two types of Channel Preset functions for memorizing active TV
channels:
Autoscan
If this is your first time to use the AVerTV Box, first use autoscan to
memorize all active TV channels in your area. autoscan will use the
frequencies in a default frequency table to search for active channels.
As AVerTV Box performs the search, it will display each channel number.
You can interrupt and cancel the searching process anytime by pressing
the Left or Right buttons on the remote.
Now press the Channel Up/Down or Number buttons on the remote
control. Check and verify that you can access all the TV channels
available in your area.
Scan All Frequency
If there are channels missing after you perform autoscan, use the scan all
frequency function and repeat the searching process.
Scan all frequency will scan frequencies starting from xx.25 MHz,
increasing by 1 MHz at a time. It will check and record all frequencies for
active channels. The new frequencies will replace the default frequency
record.
To change the display resolution,
choose DISPLAY MODE from
Menu-1 and press the Left and
Right buttons on the remote to
select from the list of standard
resolutions which the AVerTV Box
support in full screen.
To memorize channels using
autoscan, choose AUTOSCAN
from Menu-2 and select YES to
start memorizing all the active TV
channels.
User's Manual
11
Advertisement
Table of Contents
