Connecting The Antenna; Connecting An Audio Cable; Connecting The External Amplified Speaker; Connecting The Power Adapter - Avermedia tv box User Manual

Connecting the Antenna

Attach the antenna or cable TV to
ANT
the port of AVerTV Box.

Connecting an Audio Cable

Sound Card
STEREO
CONNECTOR

Connecting the External Amplified Speaker

Connect the speaker to the SURROUND port to
have a 3D Surround Sound effect. If you
have additional external amplified
speaker, you may connect it to
the SPEAKER port of
AVerTV Box.

Connecting the Power Adapter

Wall
Outlet
Plug the stereo end of the supplied audio cable
to your sound card LINE OUT port and
Audio Cable
(supplied)
RCA CONNECTORS
adapter to the DC IN port of AVerTV Box
Power
then plug it into a standard AC power outlet.
Adapter
the other two RCA connectors to the
AUDIO2 IN port of AVerTV Box.
NOTE: This type of connection allows you to
have audio at all times and to adjust
the volume from the AVerTV Box. For
audio pass through connection, make
sure the AVerTV Box is powered on
or in standby mode.
Connect the supplied power
User's Manual
TV Antenna (75 )
External Amplified Speaker
(for 3D Surround Sound Effect)
External Amplified Speaker
5