Using The Avermedia Avertv Box; Using Avermedia; Avertv Box For The First Time; Accessing Tv Controls - Avermedia tv box User Manual

Using the AVerMedia AVerTV Box

Using AVerMedia

When you power on the AVerMedia
automatically proceed to the Set Area of Setup Menu no. 2. Since TV
signals vary in different countries, you need to select the appropriate signal.
Refer to the table below for country signals.
NTSC-M
USA-STD
USA-HRC
USA-IRC
TAIWAN
JAPAN
Each column in the table above corresponds to a different type of TV system.
Only one of these TV systems (only one column) will appear as your Set Area
the first time you power on the AVerTV Box. Make sure that you select the
correct country signal from the menu.
To ensure that you can select and watch all active channels, refer to the section
Channel Presetting on how to automatically scan and memorize all active TV
channels in your area.

Accessing TV Controls

To access the various TV controls, open up the menu displays or press on
the remote control buttons.

The Remote Control

The figure on the next page shows a clear layout of the remote control unit.
®

AVerTV Box for the First Time

SECAM-DK SECAM-L
RUSSIA FRANCE
UKRAINE
®
AVerTV Box for the first time, it will
PAL -I PAL -BG
UK HUNGARY
HK EUROPE
ITALY
AUSTRALIA
ZAHAV
MATAV
GVANIM
IDAN
User's Manual
PAL -DK
POLAND-1
POLAND-2
POLAND-3
CZECH
CHINA
7