Light control unit with integrated light and presence sensor for energy saving, 10a load relay optimized for switching led load and bluetooth radio technology for control via smartphone android 4.x/ios 8.4 (8 pages)
Do not mount near gas or electric heaters. Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized personnel. — The use of accessory equipment is not recommended by OSRAM as it may cause an unsafe condition. Note —...
Page 3
Note: Receptacle caps, if supplied with the luminaire, are used for closing or opening the socket circuit. In addition, these caps can offer weatherproof protection for the receptacles that are not yet fitted with the WSLC Module. WSLCs can be installed on luminaires that feature ANSI C136.41-compliant receptacles.
Occupancy-based control* *Requires OSRAM approved 3rd party outdoor occupancy sensor. Troubleshooting There are no user-serviceable parts inside the WSLC. Please return the device to OSRAM if service is required. Regulatory Approvals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Need help?
Do you have a question about the WSLC and is the answer not in the manual?
Questions and answers