Error Messages - Printronix SL5000e Reference Manual

Error Messages

The RFID encoder can detect a number of errors. When one of
these errors occurs, the RFID encoder alerts the printer to perform
the currently selected error action (see "Error Handling" on
page 18) and display the appropriate error message on the control
panel's LCD (see Table 2).
Table 2. Control Panel Error Messages
Error Message
RFID MAX RETRY
Check System
RFID Comm Err
Check Cable
RFID TAG FAILED
Check Media
Explanation
Error Handling = Overstrike in
the RFID CONTROL menu,
and the Label Retry count has
been exhausted.
RFID error: communication
cannot be established with
the RFID encoder. Reader
will be set to Disable in the
RFID CONTROL menu and
the previous port settings
restored.
Error Handling = Stop in the
RFID CONTROL menu, and
the RFID encoder could not
read the RFID tag.
Selecting The Tools
Solution
Press PAUSE to clear the
message.
See "Troubleshooting" on
page 48.
Press PAUSE to clear the
message.
See "Troubleshooting" on
page 48.
Press PAUSE to clear the
message.
See "Troubleshooting" on
page 48.
47