Ppi1 Epc Programming Examples - Printronix SL5000e Reference Manual

PPI1 EPC Programming Examples

IMPORTANT
For all examples make sure Label Length in the QUICK SETUP
menu matches the physical length of the installed media.
Example 1
^XA
^WT0^FH^FD_87_D0_03_45_67_AB_CD_EF^FS
^RT1,0,1,1^FS
^FO100,100^A0N,60^FN1^FS
^XZ
Example 2
^XA
^WT0,,,,1FDN^FD87D0034567ABCDEF^FS
^RT1,0,1,1^FS
^FO100,100^A0N,60^FN1^FS
^XZ
PPI1 EPC Programming Examples
This programming example programs data into an
RFID tag and prints the encodation onto a smart label.
//Begin ZPL form.
//Write Tag with data = "87D0034567ABCDEF"
//(hex format).
//Read Tag into data element 1, 8–byte (16 characters)
//long (hex format).
//Print data in element 1.
//End and print label.
Same as Example 1, except an alternative PPI1 syntax
that does not require underscores between the hex
characters is used.
//Begin ZPL form.
//Write Tag with data = "87D0034567ABCDEF"
//(hex format).
//Read Tag into data element 1, 8–byte (16 characters)
//long (hex format).
//Print data in element 1.
//End and print label.
43