Set The Top-Of-Form - Printronix P7000 H Quick Reference Manual

17. If necessary, press
18. Press the
19. Close the printer cover.
20. Close the cabinet door.
21. Press ON LINE/CLEAR to place the printer online and resume

Set The Top-Of-Form

Every time you load paper, you set the top-of-form (TOF) location.
This procedure must be performed the first time paper is introduced
into the printer, and every time new paper is loaded.
1. Press
2. Raise the platen lever as far as it will go. This allows you to turn
Loading Paper (Standard Configuration)
"LOAD PAPER" fault message from the display.
PAPER ADVANCE key several times to make
sure the paper feeds properly beyond the tractors over the
lower paper guide. Feed sufficient paper to ensure the paper
stacks correctly.
printing.
ON LINE/CLEAR to place the printer in offline
mode. The LCD will display "OFFLINE / QUICK SET-UP."
Figure 10. Raising the Platen Lever
the vertical position knob freely to align the top-of-form.
ON LINE/CLEAR to remove the
Vertical Position Knob
Platen Lever
17