Match Vlan - Cisco CRS Command Reference Manual

Ios xr modular quality of service command reference
Hide thumbs Also See for CRS:
Table of Contents

Advertisement

match vlan

match vlan
To identify selected VLAN IDs as the match criteria for a class map, use the match vlan command in class
map configuration mode. To remove VLAN ID match criteria from a class map, use the no form of this
command.
match vlan [inner] vlanid [vlanid1 ... vlanid7]
no match vlan [inner] vlanid [vlanid1 ... vlanid7]
Syntax Description
inner
vlanid
Command Default
No match criteria are specified.
Command Modes
Class map configuration
Command History
Release
Release 3.3.0
Release 3.4.0
Release 3.7.0
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The match vlan command specifies a VLAN ID that is used as the match criteria against which packets are
checked to determine if they belong to the class specified by the class map.
To use the match vlan command, you must first enter the class-map command to specify the name of the
class whose match criteria you want to establish. If you specify more than one match vlan command in a
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
60
(Optional) Specifies the inner VLAN for the match in, for example, a QinQ configuration.
VLAN identifier that specifies the exact value from 1 to 4094 or a range of values from
1 to 4094. Up to eight values can be specified in a match statement.
The router supports up to eight values or ranges on a single match statement,
Note
and up to 300 values or ranges specified on up to eight match statements.
Modification
This command was introduced.
Changed the range value from 0 to 8096. to 1 to 4094.
Up to eight values or ranges on a single match statement, and up
to 300 values or ranges specified on up to eight match statements
for vlanid, were supported.
The inner keyword was added.
Quality of Service Commands on the Cisco IOS XR Software
OL-23235-03

Advertisement

Table of Contents
loading

Table of Contents