Cisco CRS Command Reference Manual page 33

Quality of Service Commands on the Cisco IOS XR Software
Task ID
Task ID
root-lr
Examples
This example shows how to set the police rate deviation tolerance to 8% on the input interface at location
0/1/CPU0:
RP/0/RP0/CPU0:router(config)# hw-module qos input police granularity 8 location 0/1/CPU0
Examples This example demonstrates how a default police rate deviation tolerance of 2% is configured on an interface,
when the police-rate-dev-tol argument is not specified. After performing this configuration step, a police
rate deviation tolerance of 2% is applied on the input interface at location 0/1/CPU0:
RP/0/RP0/CPU0:router(config)# hw-module qos input police granularity location 0/1/CPU0
Related Commands
Command
show hw-module qos input police granularity location,
on page 119
OL-23235-03
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
hw-module qos input police granularity location
Operation
read, write
Description
Displays the police granularity information for input
interfaces.
27