Show Qos Redq - Cisco CRS Command Reference Manual

show qos redq

show qos redq
To display the information for a queue from the packets switching engine (PSE) random early detection queue
(REDQ) memory, use the show qos redq command in EXEC mode.
show qos redq queue-number {input| output} location node-id
Syntax Description
queue-number
input
output
location node-id
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.5.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
qos
Examples The following sample output is from the show qos redq command:
RP/0/RP0/CPU0:router# show qos redq 5000 input location 0/1/CPU0
Tue Nov 11 03:31:02.370 PST DST
node 11
-------------------------------------------------------
weight
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
140
Number for the queue. Range is from 0 to 4294967295.
Attaches the specified policy map to the input interface.
Attaches the specified policy map to the output interface.
Displays detailed information for a queue from the PSE REDQ memory
for the designated node.
-- queue 5000 -- direction input policy
= 0
Quality of Service Commands on the Cisco IOS XR Software
Modification
This command was introduced.
Operations
read
OL-23235-03