Cisco CRS Command Reference Manual page 115

Quality of Service Commands on the Cisco IOS XR Software
RP/0/RP0/CPU0:router(config)# policy-map policy1
RP/0/RP0/CPU0:router(config-pmap)# class class1
RP/0/RP0/CPU0:router(config-pmap-c)# set qos-group 5
RP/0/RP0/CPU0:router(config-pmap-c)# exit
RP/0/RP0/CPU0:router(config-pmap)# exit
RP/0/RP0/CPU0:router(config)# interface pos 0/7/0/0
RP/0/RP0/CPU0:router(config-if)# service-policy input policy1
Related Commands
Command
class-map, on page 12
match dscp, on page 44
policy-map, on page 67
service-policy (interface), on page 93
OL-23235-03
Description
Defines a traffic class and the associated rules that match packets to
the class.
Identifies specific IP differentiated services code point (DSCP) values
as match criteria for a class map.
Creates or modifies a policy map that can be attached to one or more
interfaces to specify a service policy.
Attaches a policy map to an input interface or output interface to be
used as the service policy for that interface.
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
set qos-group
109