Cisco CRS Command Reference Manual page 143

Quality of Service Commands on the Cisco IOS XR Software
Field
class name
new dscp
Weight
Guaranteed service rate
TailDrop Threshold(bytes)
WRED
Egressq Queue ID
Queue belongs to group
Policer slot
Policer committed rate
Policer avg. kbps
Policer peak rate
Policer conform burst
Policer conform action
OL-23235-03
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
Description
Name that was assigned to this class with the class
command.
New IP DSCP value assigned to this interface.
Weight assigned to the specified class.
Service rate of the queue when all queues are
backlogged.
Tail drop threshold for the sharq queue. Once the
packets in the buffer is more than the value of the
TailDrop Threshold, the incoming packets are
dropped. The TailDrop Threshold value is a
percentage of the full queue buffer.
Weighted Random Early Detection (WRED) assigned
to the specified class.
If no weight has been assigned, the show policy-map
interface command output shows "WRED not
configured for this class."
Egressq Queue ID.
Identifies the host port for the specified queue.
Slot Identifier for the policer.
Committed Information Rate (CIR) in bits per second
(bps), gigabits per second (gbps), kilobits per second
(kbps), or megabits per second (mbps).
Average Committed Information Rate (CIR) in bits
per second (bps), gigabits per second (gbps), kilobits
per second (kbps), or megabits per second (mbps).
Peak CIR in bps, gbps, kbps, or mbps.
Programmed burst size, expressed in bytes, gigabytes
(GB), kilobytes (KB), megabytes (MB), milliseconds
(ms), or microseconds (us). The user-configured value
is in parentheses.
Policer conform action. The user-configured value is
in parentheses.
show qos interface
137