Radio Reception; Cd Operation; Playing A Cd - Jensen CD-560 User Manual

Portable stereo compact disc player with am/fm stereo radio and bluetooth
Hide thumbs Also See for CD-560:
Table of Contents

Advertisement

1.
Set the Function Selector (#20) to "RADIO". The POWER Indicator (#12) will
light
2.
Set the Band Selector (#22) to "AM" or "FM" for the desired radio band.
3.
Turn the Tuning Knob (#6) to select the desired radio station.
4.
Adjust the Volume Control (#3) to obtain the desired sound level from the
Built-in Speakers.
5.
To turn the Radio off, set the Function Selector (#20) to the "OFF" position.
TIPS FOR BEST RECEPTION
AM – The AM antenna is located inside the cabinet of the unit. If AM reception is
weak, change the position of unit until the internal antenna picks up the
strongest signal.
FM – If a stereo broadcast program is being received, the FM STEREO
INDICATOR (#5) will light. During FM or FM Stereo reception, always
keep the FM TELESCOPIC ANTENNA (#8) fully extended for best
performance. However, if FM reception is weak, try repositioning the unit
near an open window until you get the best reception.
NOTE: THIS UNIT NOT ONLY PLAYS COMMERCIAL COMPACT DISCS BUT
ALSO SELF-COMPILED CD-RW DISCS.
Notes on CD-R/RW Discs
Because of the non-standardized format definition/production of CD-R/RW
recordings, playback quality & performance is not guaranteed.
Manufacturer is not responsible for the playback of CD-R/RW discs due to
recording conditions such as PC performance, writing software, media
properties etc.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause
a malfunction.

PLAYING A CD

1. Open the CD Door (#2) by pressing down where the OPEN/CLOSE is
indicated on the CD Door (#2).
2. Carefully place an audio CD with its label side upward in the CD
compartment and close the CD Door by pressing on the CD Door (#2) where
OPEN/CLOSE is indicated on the CD Door (#2).
3. Set the Function Selector (#20) to the CD position. The LED Display (#9) will
briefly display flashing "- -" and the total number of tracks on the CD will
appear on the LED Display (#9) after a few seconds.
4. Press the Play/Pause
track. The Play/Pause Indicator (#19) will light steadily.

RADIO RECEPTION

CD OPERATION

Button (#7). The CD will start playing from the first
E-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents