Aux In Operation - Jensen CD-560 User Manual

Portable stereo compact disc player with am/fm stereo radio and bluetooth
Hide thumbs Also See for CD-560:
Table of Contents

Advertisement

NOTE:
1. When 20 tracks of CD music have been programmed, the memory is full. The
programmed tracks' numbers will show on the LED display sequentially. Then the location
"01" show on LED Display and flash. You can press Play/Pause to start the program
playback. Or repeat the (4) & (5) steps to change the track number you wish.
2. If you want to cancel the program memory, press the
during playback or once in STOP mode.
The Repeat function also applies to programmed track playback.
To Repeat Programmed Tracks
1. During program play, press REPEAT button (#13) once will repeat the
specifically programmed tracks.
2. Press the REPEAT button (#13) again will repeat all the programmed tracks.
3. Press the
STOP Button (#14) twice
You can play other music sources (iPod, MP3 or other digital audio players)
through the speakers of this unit by connecting the AUX IN Jack (#1) to your
external player's audio out jack or headphone jack.
1.
Plug one end of an audio cable (not included) into the AUX IN Jack (#1) and
the other end of the cable to the headphone jack of your digital audio player.
2.
Set the Function Selector (#20) to
3.
Start playing the device you plugged into the AUX IN Jack (#1).
4.
Slowly adjust both the volume controls of your CD-560 and the external
device until you reach a comfortable listening level.
5.
Turn off your iPod, MP3 player etc. when finish listening.
6.
Set the Function Selector (#20) to the "OFF" position to turn CD-560 off and
unplug the AUX IN Jack.
Note :
If you connect CD-560 to the Line-Out Jack of your external device, you
only need to adjust the VOLUME CONTROL of your CD-560. If you connect
to the Headphone Jack of your external device, you may need to adjust
both the volume controls of your external device and CD-560 to obtain the
desirable listening level.
Remember to turn off the CD-560 when you have finished listening. Don't
forget to switch off the power of your external audio device as well.
to cancel program playback .

AUX IN operation

IN.
/AUX
E-9
STOP Button (#14)
twice

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents