Playing From A Bluetooth Device; Bass Boost Operation - Jensen CD-560 User Manual

Portable stereo compact disc player with am/fm stereo radio and bluetooth

Hide thumbs Also See for CD-560:

User manual (15 pages)

Table Of Contents

Table of Contents

Pairing a Bluetooth enabled device with the CD-560.

1. Set the Function Selector (#20) to the

INDICATOR (#10) will flash slowly and "Dew Drop" sound will be heard.

(

Make sure no audio cable is connected to the AUX IN jack )

2. Turn on the Bluetooth function of your device and enable the search or scan

function to find the CD-560.

3. Select "CD-560" from the device list when it appears on your device screen. If

required, enter the pass code "0000" to pair (link) CD-560 with your device.

4. If you are pairing (linking) your computer to the speaker using Bluetooth, you

may need to set the CD-560 as your computer's default sound device.

5. After pairing CD-560 with your Bluetooth device successfully, The

INDICATOR (#10) will light steadily.

6. If you want CD-560 change to pair with another Bluetooth device, press and

hold Pairing,

(#10) will flash and "Dew Drop" sound will be heard. CD-560 will go into

Pairing/Discoverable mode. Repeat steps 2 & 3.

Now you can play music from your Bluetooth device wirelessly to CD-560.

Selecting your favorite song, press Play/Pause

device or Play/Pause

Bluetooth device playback.

2. Press Skip Forward

to select the Next or Previous track.

( The SEARCH function does not apply to Bluetooth operation )

3. Slowly adjust both the volume controls of your CD-560 and your Bluetooth

device until you reach a comfortable listening level.

Note :

1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth

enabled devices for Bluetooth operation since it may vary from model to model.

2. If your Bluetooth enabled device does not support A2DP profile, it will not play the

music through the speaker, even if paired (linked).

3. Remember to turn off the CD-560 when you have finished listening, s et the

Function Selector (#20) to the "OFF" position

4. Don't forget to switch off the power of your external audio device as well.

1. To enhance the low frequency sound, press the BBS BUTTON (#4) once

(button in) to activate.

2. Press the BBS Button (#4) again (button out) to turn the Bass Boost off.