Radio Operation - Jensen CD-590 User Manual

BATTERY REPLACEMENT
When the output sound of this unit becomes distorted or the CD player operation appears
unstable, the batteries are weak. You need to replace all the exhausted batteries at the same
time as soon as possible to avoid battery leakage.
1. Set the FUNCTION SELECTOR (#23) to RADIO position.
2. Set the BAND SELECTOR (#25) to "AM" or "FM / FM ST." for the desired radio band.
3. Rotate the TUNING CONTROL (#24) to select the desired radio station according to
the dial scale on the knob.
4. Rotate the VOLUME CONTROL (#22) to adjust to the desired output level.
5. To turn off the radio, slide the FUNCTION SELECTOR (#23) to OFF/TAPE position.
TIPS FOR BEST RECEPTION
AM - The AM antenna is located inside the cabinet of the unit. If AM reception is weak,
change the position of unit until the internal antenna picks up the strongest signal.
FM - If a stereo broadcast program is being received, the FM STEREO INDICATOR (#8) will
light. During FM or FM Stereo reception, always keep the FM TELESCOPIC ANTENNA
(#13) fully extended for best performance. However, if FM reception is weak, try
repositioning the unit near an open window until you get the best reception.
PLEASE READ THIS IMPORTANT INFORMATION:
CD mechanisms used in devices like this are designed to fully read all commercial CDs. They
will also read self-compiled CD-R/CD-RW discs but it may take up to 10 seconds for playback
to start. If playback does not start, it is likely due to the quality of the CD-R/RW disc and/or the
compatibility of the CD compilation software. Manufacturer is not responsible for the playback
quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
FOR WINDOWS USERS:
When using the "Burn a CD" feature to create an MP3 CD in Windows, you must select the
"With a CD/DVD player" option when it asks "How do you want to use the disc?" The MP3 CD
will not play on this unit if you select the "Like a USB flash drive" option or if the MP3 CD is not
finalized.
PLAYING A COMMERCIAL CD
1. Set the FUNCTION SELECTOR (#23) to the CD position.
2. Open the CD DOOR (#15), load a CD with the label side facing upward and close the CD
door (#15).
3. The CD will spin and start reading the disc information. When finished, the LCD DISPLAY (#7)
will show the total number of tracks on the CD.
4. Press the CD PLAY/PAUSE
5. While playing, press the PLAY/PAUSE
number will be flashing on the display. Press the PLAY/PAUSE
resume playing.
6. Adjust the VOLUME CONTROL (#22) to the desired volume level.
7. Press the CD STOP
8. To turn off the CD player, slide the FUNCTION SELECTOR (#23) to OFF/TAPE position.

RADIO OPERATION

CD OPERATION
BUTTON (#9) to start playing the CD.
BUTTON (#9) to pause playback. The current track
BUTTON (#10) to stop playing.
E-8
BUTTON (#9) again to