Power Sources; Battery Operation; Ac Power Connection; Battery Warning - Jensen CD-560 User Manual

The CD-560 operates using standard 120V~ 60Hz AC household power or 8 x "C"
size (UM-2) batteries (Not included).
A. BATTERY OPERATION
For best performance and longer operating time, we recommend the use of alkaline
batteries.
1. Remove the Battery Door.
2. Following the polarity (+ and -) diagram as
shown inside the battery compartment, insert
8 'C' size (UM-2) batteries.
3. Replace the Battery Door.

BATTERY WARNING

1. Be sure that the batteries are installed
correctly. Wrong polarity may damage the unit.
2. (a) Do not mix old and new batteries.
(b) Do not mix alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium) batteries.
3. If the unit is not to be used for an extended period of time, remove the batteries.
Old or leaking batteries can cause damage to the unit and may void the
warranty.
4. Do not dispose of batteries in fire, batteries may explode or leak.
5. Do not try to recharge batteries not intended to be recharged; they can
overheat and
rupture.( Follow battery manufacturer's directions ).
B. AC POWER CONNECTION
1. Insert one end of power cord to the AC Socket (#21) at the back of the CD-560.
2. Connect the power cord to AC power source.
3. When the unit is operated from AC power source, the internal battery source
will automatically be disconnected.

POWER SOURCES

E-6