weinor BiEasy Box Operating Manual page 9

BiConnect BiEasy Set
3.2 F unction
2 2 B 2 2 B
3.2.1 G eneral
3 6 B 3 6 B
The BiEasy Box and BiEasy Stick in connection with a device based on Apple iOS and the
installed BiEasy App can be used to operate and configure all of the programmed bidirectional
receivers.
3.2.2 B idirectional radio system
3 7 B 3 7 B
The term bidirectional radio system means the transmission of radio signals to remote receivers
and the feedback possibility from the remote receiver to the dispatcher. The radio signal can be
sent directly to the target receiver. If this is not possible, the radio signal is routed via other
bidirectional participants until it reaches its target receiver. The target receiver executes the
command and sends a confirmation back to the dispatcher. The prerequisite for a bidirectional
radio system is therefore the radio transmission capability and the radio receiving capability of all
components involved.
3.2.3 F unctioning principle of the BiEasy Box
3 8 B 3 8 B
The BiEasy Box is permanently switched on and is incorporated into your home network.
When you run the BiEasy App version, it connects to the BiEasy Box. The BiEasy App and
BiEasy Box can be used to operate all of the programmed BiRec stick receivers.
3.2.4 S tatus display of the BiEasy Box
3 9 B 3 9 B
The status display on the top of the housing signalises different operating modes:
top green light: voltage supply
right flashing green light: according to load of CPU
left green light: after boot process
red light: during check after update
flashing red light: during update process
Item number 117445-0000
Version 1 15.11.2013
Subject to technical modifications
Page 9/23
Main Operating Manual