weinor BiEasy Box Operating Manual page 15

BiConnect BiEasy Set
3.6.2 M enu Scene
4 6 B 4 6 B
The combination of switch commands of specific devices into one scene is sensible if these
devices will not be switched individually by hand or if a certain action will be frequently accessed.
For example, the BiEasy App combines the scene "Leave house" with the action "Run in" for the
awnings and "Off" for the lighting and heating
A scene can be activated by tapping on the scene entry
BiEasy App: Main menu "Scenes" (example)
a) Creating scenes
A new scene can be added in the configure dialog by tapping on +. A name is assigned to the
scene following the selection of an icon. Devices can be assigned to the scene by selection of
the newly created list entry by tapping on the right and subsequent selection of the device
entry. A confirmation tick appears behind every selected device. After saving, the creation of a
scene is completed in a further dialog by the assignment of the actions to be carried out.
b) Retrieving scene
The scene is executed by tapping on a scene. The scene is highlighted in colour after the
successful execution.
By tapping on the right arrow in the list entry, the menu for the setting or configuration of a
scene opens.
c) Deleting scene
A scene can be erased using the Configure button top right in the scene menu or by a quick
wipe over the scene entry. The erase procedure is achieved via the red minus symbol or via
the red erase button.
Item number 117445-0000
Version 1 15.11.2013
Display example:
Possible actions in the main menu "Scenes"
Subject to technical modifications
Page 15/23
Main Operating Manual
a. Creating / changing scenes
b. Retrieving scene
c. Deleting scene