weinor BiEasy Box Operating Manual page 12

BiConnect BiEasy Set
3.4 C onnection of the BiEasy Stick to the BiEasy Box
2 4 B 2 4 B
Plug the programmed BiEasy Stick (directly or with the enclosed USB extension cable) into one of
the two USB sockets of the BiEasy Box.
The information about programmed dispatchers is transmitted to the BiEasy Box. Further actions
can be carried out using the app.
3.5 B iEasy App
2 5 B 2 5 B
The BiEasy App can be located, downloaded and installed at the App Store (iTunes Store) using
the search words "weinor" or "BiEasy".
3.5.1 I nitial registration on the BiEasy Box
4 3 B 4 3 B
With a new device, the BiEasy Box must first be "searched for" and "found", this is then followed
by the login. The pertinent button is "Seach for BiEasy Box". The successful search is followed by
the selection of the found BiEasy Box and the activation of the actual login process with the login
button. Here is where you log in as user "Admin" with the standard password "Admin", whereby
the login password must first be changed and confirmed. These data will be used for subsequent
logins.
The application attempts to carry out a fully automatic configuration.
After the start of the BiEasy App, the start screen will appear for the entry of the login data.
In the case of failed automatic configuration, you can change to manual configuration. Here, in the
corresponding fields, information concerning the IP address, network port ("12345"), user name
and password for the user names can be entered.
3.5.2 Range of functions of the BiEasy App
4 4 B 4 R
The BiEasy App can operate the 15 channels of the BiEasy Stick. The operation of the receiver,
creation of users etc. is dealt with in the app.
The functions of the BiEasy Box with the BiEasy Stick are only available after the legitimation of
the user by entering the user names and password.
Item number 117445-0000
Version 1 15.11.2013
Subject to technical modifications
Page 12/23
Main Operating Manual