weinor BiEasy Box Operating Manual page 13

BiConnect BiEasy Set
3.6 M enu structure of the BiEasy App
2 6 B 2 6 B
The user interface contains three main menus for the administration and control of the registered
(programmed in the BiEasy Stick) receivers.
Szenen
anlegen
löschen
Szenen ausführen
3.6.1 M enu devices
4 5 B 4 5 B
In the BiEasy Stick, programmed receivers appear automatically in the "Devices" menu after the
stick has been plugged into the BiEasy Box. The user is informed by means of intuitive guidance
with corresponding dialogs of the necessary steps and the pertinent Status messages at all times.
This is also where you can delete programmed devices (in case you should lose the BiEasy
Stick). The usual procedure to delete or remove of a programmed receiver from the system is
described in chapter 5.2 "Delete dispatcher channel in receiver".
BiEasy App: Main menu "Devices"" (example)
Item number 117445-0000
Version 1 15.11.2013
Geräte
Geräte bedienen
(je nach Art des
Geräts)
Gerätebeschriftung
ändern
Gerätetyp ändern
Geräte löschen
(bei nicht
installiertem BiEasy
Stick)
Display example:
Possible actions in the main menu "Devices"
Subject to technical modifications
Page 13/23
Main Operating Manual
Einstellungen
Benutzerverwaltung
Konfiguration
Impressum
a. Creation of devices
b. Configuration of devices
c. Deleting devices
d. Operation of devices
Hilfe
Allgemeiner
Hilfetext
Link zum weinor
APP-Support