Auxiliary-Device (Pointing Device) Connector - IBM xSeries 445 Type 8870 Option Installation Manual

Auxiliary-device (pointing device) connector

There is one auxiliary-device connector that supports a mouse or other pointing
device located on the rear of the server just under the keyboard connector.
The following illustration shows the pin-number assignments for the auxiliary-device
connector on the end of the cable.
RXE Expansion Port
There are two RXE Expansion Ports that are used to connect your server to a
remote I/O enclosure.
The following illustration shows the pin-number assignments for the RXE Expansion
Port on the end of the cable.
SMP Expansion Port
There are up to six SMP Expansion Ports that are used to interconnect the SMP
Modules in your server.
The following illustration shows the pin-number assignments for the SMP Expansion
Port on the end of the cable.
Serial Port
The serial port comes with your server in the same box which contained this
publication and other components.
The following illustration shows the pin-number assignments for the serial port.
48
47
48
47
1 5
6 9
6 5
3
4
2 1
2
1
2
1
Chapter 3. I/O connectors and LEDs
77