I/O board internal connectors
The following illustration identifies the internal connectors on the I/O board. This
board supports the input and output ports in the server.
Reserved (J12)
Reserved (J11)
Reserved (J10)
Figure 7. I/O board connectors
Remote Supervisor Adapter component locations
The following illustration identifies the connectors and LEDs on the Remote
Supervisor Adapter.
External power
supply connector
Figure 8. Remote Supervisor Adapter connectors and LEDs
SCSI B
connector (J38)
I/O VRM (J31)
Fan 4
connector (J21)
Fan 3
connector (J9)
Power/Reset
connector (J5)
SCSI A
connector (J2)
Ethernet activity
LED (green)
Error LED
(amber)
Management
Power LED
port
(green)
ASM Interconnect port
(RJ-14)
Riser card
connector (J44)
Boot recovery
(BIOS) (J28)
3 2 1
3 2 1
3 2 1
3 2 1
Battery (BH1)
WOL disable
Fans 1 and 2
(J14)
connectors (J8)
USB cable
connector (J1)
Media bays
connector (J3)
Reserved (J55)
Lithium
battery
Ethernet link
LED (green)
Ethernet port
(RJ-45)
Clear CMOS
(J19)
Power-on
password (J20)
Chapter 1. Introduction
7