Mouse Cabling - IBM xSeries 445 Type 8870 Option Installation Manual

Mouse cabling

Your server has one mouse connector located on the back of the server. Use this
connector to connect a mouse to the server. For detailed information about this
option and how to connect it to your server, see the documentation that comes with
the option.
Keyboard cabling
Your server has one keyboard connector on the back of the server. Use this port to
connect the server to a keyboard or optional console switch. You can also connect
a USB keyboard to the server using one of the USB connectors. After installing a
USB keyboard, you might need to use the Configuration/Setup Utility program to
enable keyboardless operation and prevent the POST error message 301 from
being displayed during startup. For detailed information about this option and how
to connect it to your server, see the documentation that comes with the option.
Gigabit Ethernet cabling
Your server has two Ethernet connectors on the back of the server. Use these
connectors to connect the server to a LAN.
Note: A third Ethernet connector is located on the Remote Supervisor Adapter. This
Remote Supervisor Adapter cabling
Your server comes with a Remote Supervisor Adapter. For information about cabling
the Remote Supervisor Adapter connectors, see the User's Guide on the IBM
xSeries Documentation CD.
connector is used for specific supervisory functions and should not be
confused with the Gigabit Ethernet connector located next to the USB
connectors.
Chapter 2. Installing options
73