General Operation - Jensen JDM118BT Installation And User Manual

Am/fm receiver with bluetooth and detachable front panel
Hide thumbs Also See for JDM118BT:
Table of Contents

Advertisement

GENERAL OPERATION

Turn Unit On/Off
Press the power (
again to turn off the unit.
ress the power (
Adjust Volume (VOL)
Rotate the VOL knob on the front panel or press the VOL
control to increase or decrease the volume level.
Adjust Menu Options (SEL)
ress the SEL button on the front panel or AUDIO on the remote control repeatedly to cycle
through the following adjustable audio functions: BASS, TREBLE, BALANCE, FADER, EQ
OFF, CLASS/ROCK/POP/ FLAT, LOUD ON/OFF.
- BASS: -7,-6, ~, -1, 0, +1,~, +6,+7
- TREBLE: -7,-6, ~, -1, 0,+1,~, +6,+7
- BALANCE: L7, L6,~, L1, 0, R1,~,R6, R7
- FADER: R7, R6, ~, R1, 0, F1, ~, F6, F7
- EQ(Equalizer) Setting: OFF, CLASS, ROCK, POP, FLAT
- Loudness: LOUD ON/OFF
Press and hold SEL button on the panel or AUDIO button on the remote control to access these
menu functions: BEEP ON/OFF, DX/LOC, STEREO/MONO, CLOCK 12/24, BT MANUAL/AUTO,
AREA US/EU.
otate the VOL knob on the front panel or press the VOL
control to adjust the selected item.
- BEEP ON/OFF: Enable or disable the BEEP signal to confirm setting.
- D
X/LOCAL: Enable or disables the local broadcast mode (LOCAL).
- Stereo/Mono: Switches between MONO and STEREO reception mode for radio
frequencies.
CLOCK 12/24
-
Note: If 12 hour display is selected , AM= Morning; PM= Afternoon
BT MANUA/AUTO: Select between the manual and auto receive an incoming call.
-
BT MANUA: In this mode, press the
BT AUTO: In this mode, the bluetooth handsfree systems will receive the incoming call
automatically after hearing telephone ringing about 6 seconds.
- AREA US/EU: This car radio is equipped the USA / Europe frequency.
Rotate the volume knob to switch between USA and Europe frequency.
The system will change the frequency setting in about 3 seconds.
otate the VOL knob on the front panel or press the VOL
control to adjust the selected item.
Setting the Clock (DISP)
1. To display clock time, press the DISP button.
2. To set clock time, press and hold the DISP button and the hour will flash.
3. Press the
or
4. Press the DISP button and the minutes will flash.
5. Press the
or
) /MODE button on the front panel to turn on the unit, and long press it
) button on the remote control to turn the unit on or off.
: S
elect between 12 hours and 24 hours display.
button on the front panel or on the remote control to adjust the hour.
button on the front panel or on the remote control to adjust the minute.
/VOL
/VOL
button to receive the incoming call.
/VOL
button on the remote
utton on the remote
button on the remote
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents