General Operation - Jensen MPR2110 Installation And Owner's Manual

MPR2110 OPERATION

General Operation

Power On/Off Press the button to turn the unit on. Press again to
turn the unit off.
Press MODE to select between Radio, USB, Auxiliary Input
Changing Modes
and Bluetooth. Modes of operation are shown in the display.
Adjust volume using the volume knob (00-43).
Volume
Press to silence the audio. Press again to resume listening
Mute
at the previously selected volume.
Insert a 3.5mm cable in the unit's front AUX port.
Auxiliary Inputs
Press the RESET button to reset the unit back to the factory
Reset
settings if abnormal operation occurs. The reset button is
located on the front panel.
With the unit on, long press DISP to display clock time. Press
Setting the Clock
and hold DISP until the hours or minutes begin to flash, then
release. Rotate the volume knob to adjust the time.
Long press DISP to finish the clock setting.
Display
Press DISP to toggle display between various displayed
information.
Audio / Menu
Press the volume knob momentarily to select between audio
functions.
Press and hold the volume knob for more than two seconds
to select between the menu functions.
Rotate the volume knob left/right to adjust or activate the
desired function/audio.
5