Swiveling, Elevating Leg Rests - Invacare Action 1 R User Manual

Invacare® Action 1 R

3.5.2 Swiveling, elevating leg rests

Swiveling
1. Activate the release lever A and swivel the leg rests
to the outside.
Swiveling forwards
1. Swivel the leg rest forwards until it engages.
Unhinging
1. Activate the release lever A.
2. Pull the leg rest upwards.
Hinging
1. Hinge the leg rest on the front of the frame and swivel
it forwards until it engages.
Angle adjustment
There are nine preset positions available for angle
adjustment.
14
1. Loosening the knob D and pull it up with one hand
while supporting the leg rest with your other hand.
2. Adjust into one of nine preset positions, downwards
the knob D into the desired position and firmly tighten
the knob.
Calf pad adjustment
The calf pad E swings away during transfers and has three
depth adjustment options.
Depth adjustment:
1. After loosening the fixing screw C adjust to the desired
depth and firmly tighten the fixing screw.
Invacare recommends that depth adjustment is carried out
by an authorized dealer.
Foot plate adjustment
There are two different foot plates available.
• Height adjustable foot plates
1. Loosening the fixing bolt B with 10 mm spanner.
2. Adjust into one of four preset positions and tighten
the fixing bolt (5 Nm) B into the desired position.
• Height, depth and angle adjustable foot plates
1. Loosening the screw F with 5 mm Allen key.
2. Adjust into the depth and angle positions and
firmly tighten the screw (12 Nm) F into the desired
position.
Invacare recommends that footplate adjustment is carried
out by an authorized dealer.
1637828-B