Swiveling Leg Rests; Seat Cushion - Invacare Alu Lite User Manual

3.4.1 Swiveling leg rests

Swiveling
1. Activate the release lever A and swivel the leg rests
to the outside.
Swiveling forwards
1. Swivel the leg rest forwards until it engages.
Unhinging
1. Activate the release lever A.
2. Pull the leg rest upwards.
Hinging
1. Hinge the leg rest on the front of the frame and swivel
it forwards until it engages.
Foot plate height adjustment
1. Loosening the fixing bolt B with 13 mm spanner.
2. Adjust and tighten the fixing bolt (10 Nm) B into the
desired position.
Invacare recommends that footplate adjustment is carried
out by an authorized dealer.
1648362-A
To ensure a good position of the feet the heel strap
is attached to the leg rest support and adjustable
by Velcro® fasteners.

3.5 Seat cushion

A suitable cushion is recommended to provide an even
pressure distribution on the seat.
CAUTION!
Adding a cushion to the seat will raise your
height above the ground and can affect your
stability in all directions. If a cushion is changed
it may also change the user's stability. If the
thickness of the cushion is changed, a complete
set up of the wheelchair need to be done by an
authorized dealer.
– We recommend to use an Invacare or Matrx
cushion with anti-slip base cover in order to
prevent sliding.
Components and their functions
13