Data Link Cable Wiring - Mitsubishi AJ65SBT-64AD User Manual

4 SETUP AND PREPARATION BEFORE OPERATION

4.7 Data Link Cable Wiring

4.7.1 Instructions for handling the CC-Link dedicated cables
4.7.2 Connection of the CC-Link dedicated cables
Master module side
Termination resistor
This section explains the wiring of the CC-Link dedicated cable used for connection of
the AJ65SBT-64AD and master module.
Do not handle the CC-Link dedicated cables roughly as described below. Doing so can
damage the cables.
Compact with a sharp object.
Twist the cable excessively.
Pull the cable hard. (more than the permitted elasticity.)
Step on the cable.
Place an object on the top.
Scratch the cable's protective layer.
Connect the CC-Link dedicated cable between the AJ65SBT-64AD and master
module as shown below.
(Blue)
DA
(White)
DB
(Yellow)
DG
SLD
CC-Link dedicated
FG
cable
AJ65SBT-64AD
DA
DB
DG
SLD
CC-Link dedicated
FG
cable
4 - 8
MELSEC-A
I/O module or like
DA
Termination resistor
DB
DG
SLD
FG