Makita HP2030 Instruction Manual page 8

Reversing switch action
CAUTION:
Always check the direction of rotation before operation.
.Use the reversing switch only after the tool comes to a complete stop. Changing the
This tool has a reversing switch to change the direction of rotation. Move the reversing
switch lever to the
0
position for clockwise rotation or the
0
position for counter-
clockwise rotation.
direction of rotation before the tool stops may damage the tool.
Speed change
CAUTION :
Use the speed change lever only after the tool comes to
a
complete stop. Using the speed
change lever before the tool stops may damage the tool.
Two rpm ranges can be preselected with the speed change lever. Turn the lever to the
position 1 for low speed or the position 2 for high speed. If the lever
is
not turned
smoothly, turn the chuck slightly in either direction and then turn the lever again.
Action
mode
change
lever
- \
Position 1 Position 2
8