Canon Shift Tray-E1 Service Manual page 14

4
Drive System
Tray Drive Unit
●
■ Removing the Shift Tray
1. Remove the Left Rear Cover and disconnect the Reader Power Supply Cable.
2. Remove the Toner Replacement Cover.
3. Remove the Left and Right Face Covers.
4. Remove the Left Upper Cover.
x3
x2
4
5. Take out the Shift Drive Unit.
•
2 Screws (Binding; M4x2)
•
3 Rubber Caps
6. Disconnect the 2 connectors.
7. Remove the Harness Fixation Plate.
•
1 Claw
•
1 Boss
•
Screw (RS Tightening; M4x8)
F-4-7 F-4-7
Cap
x2
x2
4-4
Cap
F-4-8 F-4-8
F-4-9 F-4-9
4-4