Canon Shift Tray-E1 Service Manual page 28

6) Remove the Delivery Cover.
•
5 Stepped Screws (The 3 removed Stepped Screws will be used in step 10.)
•
3 Claws
x5
7) Remove the 2 screws, and install the Shift Delivery Support Base (1) using the removed
screws.
x2
6
F-6-5 F-6-5
x2
6
8) Remove the screw, and install the Shift Delivery Support Base (2) using the removed screw
and the screw included in the package.
•
1 Screw (RS Tightening; M4x8)
9) Install the Shift Tray Support Base.
•
2 Bosses
•
2 Screws (RS Tightening; M4x8)
x2
F-6-6 F-6-6
x2
Boss
Boss
F-6-8 F-6-8
6-4
F-6-7 F-6-7
6-4