Advertisement
CHANGING OR CORRECTING THE SETTINGS
Note:
If the digital display displays"-:-
-", the time, date
(and recording programmed) should be reset.
Press the
MENU/lV
button, the main menu is displayed.
Press the ( <
or
) cursor button to select the desired menu
(TIMER, INDEX
or
MODE)
then follow the steps below to
modify or correct a setting.
The input procedure is the same as for
VCR PRESEITING
starting on page 4.
Note:
The welcome screen is only displayed when the VCR is
connected for the first time or if the power to the VCR
has failed or has been disconnected for more than 1
hour.
Normally, once it has been set, the video channel does not
need to be changed.
If you change your TV receivers, or for any other reason, the
video channel can be set by playing back a tape on the VCR
and adjusting the tuning on the TV receiver as described (see
page 4).
OPress
the
MENWTV
button.
@c~TIMER"
is selected.
oPress
the OK button.
@Using the (V) cursor button, select
"CLOCK SET".
@
Preee the
OK
button.
For time ehifting (TIME SHIIT) adjustment (Summer/
Standard time), simply press the
(A
or 7) cursor
button.
O Press the
MENWTV
button.
@Using the (-)
cursor button, select
"MODE'.
@Press
the
OK
button.
@Using the (7) cursor button, select
"LANGUAGE.
@Press
the
OK
button.
OPress
the
MENIJTV
button.
@Using the (>)
cursor button, select
"MODE.
~
Press the
OK
button.
@"TUNING"
is selected.
@Press
the
OK
button.
7
Advertisement
