Advertisement
i
INDEX SEARCH FUNCTION
When a recording is made, an index signal is automatically
placed at the beginning of the recording. This index can be
used to search for the recording you wish to watch.
Index signals are not recaded after a recording pause.
Notes:
Make sure that
indexes
are at least
five minutes
apart
from
each
other.
If a cassette
tape is not loaded,
the
"INDEX"
menu will not
be accessible.
\
r
\
\tii),
Index scan search
As instructed, the VCR will go into rewind or fast forward mode,
look for an index signal, play back the first five seconds of the
mresponding
recording then continue onto the next index
signal. It will do so until the beginning (or the end) of the tape.
Display the "INDEX" on-screen menu, as described
O Press the
MENWTV
button.
@ Using the(P)
cursor button, select
"INDEX".
Press
the OK button.
Using the ( <
or
) cursor button, select "M" to scan
toward the end of the tape, or "44" to scan toward the
beginning of the tape.
Eiim#m
gml"
-54321
12345+
SET:
A-4k
START
: ~
Press the
OK
button and the scan function will start.
During the scan operation "SCAN" will be displayed in
the top left comer of the screen.
SCAN
44
When the desired recording is found, press
the PLAY>
button during that 5-second period to start normal playback
from that position.
To stop the scan function, press the
STOP
button.
Index search
If the index relative to the search start location is known, it is
possible to instruct the VCR to go directly to the beginning of
that recording and starl playback.
Display the
"INDEX
on-screen menu, as described
below.
O Press the
MENWTV
button.
@ Using the(F)
cursor button, select
"INDEX".
Press
the OK button.
@ Using the (V) cursor button, select
"SEARCH".
Using the ( <
or
) cursor button, select the desired
index number.
Note:
Do not forget that when looking toward the beginning of
the tape, index number"1" will only take you to the
beginning of the present recording.
Example:
To search for the third recording after the search
start position, use the (>)
cursor button to select
the index number"3
on the "+" side (right side).
Press the
OK
button and the search function will start.
During the search operation
"SEARCH"
will be
displayed in the top-left corner of the screen.
[
SEARCH
3
To stop the search function, press the
STOP
button.
15
Advertisement
