Advertisement
RECORDING TELEVISION BROADCASTS
Inseti a video cassette.
Select the desired tape speed using the SP/LP button.
Press the TV/VCR button to display "VCR" on the VCR
display.
Press the numeric buttons, or the (+ or -) button, to
select the channel to be recorded.
Example:
Position number "2'"
Press the
REC
buttons.
Video recording starts. This is the normal video
recording procedure.
Mis-arasure prevention eject
The cassette will automatically be ejected if recording is
attempted on a video cassette without an erasure-prevention
tab.
To stop the recording, press the
STOP
button.
Auto rewind
The VCR automatically rewinds the tape when it reaches the
end. This function does not operate with timer recording or
QSR timer recording.
Recording duration
I
It is possible to select the recording tape speed by pressing the
SP/LP button.
SP mode: for the best image and sound quality
LP mode: for the longest recording duration
. . . . . . . . .
.,,.,.,.,.,:,.,...,
. . . . . . . . . . . . . . . . .
..'. . . . . . . . . . . . . . . . . . . . . .:..
LP made
(min.)
E-30
30
60
E-60
60
120
E-90
90
180
I
E-120
I
120
I
240
I
I
E-1 50
I
150
I
300
I
E-1 80
180
380
E-195
195
390
E-21O
210
420
I
E-240
I
240
I
480
I
I
Quick Start Recording (QSR) timer
I
Timer recording is simple.
You can start a recording and then programme when the VCR
is
to stop recording and go to stand-by mode automatically.
@Press
the
REC
buttons to start recording.
@Press
the
REC
buttons again and the
"QSR --:-
-"
indkation will display on the TV screen. The timer indicator
(Q) will light after the recording end time is set.
Within 10 seconds, set the recording end time by using the
REC
and (+ or -) buttons.
Each press of the
REC
buttons will advance the
recording end time by units of 30 minutes.
Each press of the + button will advance the recording
end time by units of 1 minute.
Each press of the - button will retard the recording end
time by units of 1 minute.
I
1<
1
QSR
12:35
To stop the recording at any time, press the
STOP
button.
Checking/Changing
When the
REC buttons are pressed during QSR recording,
the recording end time will blink for 10 seconds.
The recording end time can be changed by pressing the
.
REC
and (+ or -) buttons during this 10-second period.
I Other recording possibilities
I
If you wish to avoid recording unwanted material
oDuring
recording, press the II
PAUSESTILL
button.
The TV picture and sound will not be recorded.
@Press
the II
PAUSE/STILL
button or
REC
buttons, and
the recording will resume.
Note:
If the record pause mode continues for about five
minutes, the VCR will automatically go into the stop
mode in order to prevent damage to the tape.
Recording one programme while watching another
~~st;
recording the desired TV programme selected on the
@Press
the
lV/VCR
button to erase "VCR" on the VCR'
display.
oSelect
on the TV receiver the programme you want to
watch.
11
Advertisement
