Advertisement
i
SPECIAL PLAYBACK
I Forward search
I
•l Press the FFW button during playback or fast-fonvard
operation. The picture can be viewed while the tape is
advanced at a fast speed.
Normal playback will resume as the
PLAY>
button is
pressed.
I
Reverse
search
I
Press the 44REW button during playback or rewind
operation. The picture can be viewed while the tape is
rewound at a fast speed.
•l Normal playback will resume when the PLAY>
button is
pressed.
Note:
To search for a particular scene you can switch from
fast forward to forward search and vice versa by simply
pressing the FFB
button, or from rewind to reverse
search by simply pressing the 44 REW button.
I
Still picture
I
Press the II PAUSE/STILL
button during playback. A still
picture can be viewed.
Normal playback will resume when the
PLAY>
button is
pressed.
Still vertical lock adjustment
•l
If the still picture moves up and down, press the (+, -)
buttons to adjust the still picture.
COUNTER MEMORY
I
Frame advance
I
•1
•1
Press the II
PAUSEISTILL
button during still playback to
advance the picture frame by frame. Each press advances
one frame.
Normal playback will resume when the
PLAY*
button is
pressed.
I
Slow motion
I
Press the
SLOW
button during playback or during still
picture.
The tape speed can be set from 1/5 to 1/25 of normal speed
by pressing the SLOW button.
Normal playback will resume when the
PLAY*
button is
pressed.
Notes:
If still picture or slow motion playback is continued for about
five minutes, the VCR will automatically change to stop
mode in order to prevent the tape from being damaged.
During special playback modes the picture may contain
some noise or vibration. But this is not a malfunction.
This VCR will not guarantee the picture quality of special
playback in the LP mode.
Depending on the type of TV receiver connected to the
VCR, special playback of tapes recorded in the LP mode
may give a black and white image. However, this does not
indicate a malfunction of the VCR.
If noise bars are visible in the still picture, frame advance or
slow motion mode, use the (+, -) buttons while in the slow
motion mode to correct.
This convenient feature for finding the beginning of a specific
recording etc., is made possible by the
"Linear Time
Counter"
that indicates the tape run time in hours, minutes
and seconds.
Whenever
you load a cassette
tape, the counter will be
reset to "0:00:00".
The counter
operates
using control signals which are
recorded on the tape, hence if you play back a tape or
portion of tape which has nothing recorded on it, the
&unter will not operate.
Notes:
When
rewinding
further back from position "0:00:00", the
counter shows figures beginning with "-".
Press the
RESET
then the
MEMORY
button before
starting recording or playback. The zero point of the
counter is now m-emorized and the memory indicator
"~" will illuminate.
When the 44REW button is pressed at the end of
recording, or playback, the tape will be rewound
automatically to the memorized position and then stop.
The
tape stops
at the memorized
position
even when
using
fast
forward
when the counter reading begins with "-".
10
Advertisement
