Advertisement
CASSETTE LOADING AND UNLOADING
I
Loading
I
When a video cassette is inserted, it will be loaded
automatically and the cassette-in (-)
indicator will illuminate.
Auto power on
The
power is automatically switched on as a cassette is
inserted while the VCR is in the stand-by condition.
Unloading
I
Power off eject
The
video cassette will be ejected when the 4
EJECT
button is
pressed, even when the VCR is in stand-by condition.
CAUTION: Do
not put your hand or other objects in the
cassette loading slot because of the risk of injury or an
accident.
Be
sure to keep small children away from the
VCR.
PLAYBACK
Erasure-prevention tab
If the erasure-prevention tab on the back of the video cassette
is removed, the cassette cannot be recorded on.
This tab is designed to prevent the accidental erasure of
recorded material.
Note:
The tab should be snapped off at its base, and removed
completely.
To record onto the same cassette again, place two layers of
adhesive tape over the space where the tab was, so as to
cover the space completely.
~
Q
,,.
0
,,:,;
,:, fi, .,.:,,::,.,,
?
""'"~'~
g$
Erasure-prevention
tab
Insert the video cassette.
Press the PLAYb
button.
Auto piay
l%e
VCR will play back a tape automatically when a video
cassette is inserted whose erasure-prevention tab has been
removed.
To stop the playback, press the
STOP button.
.
To rewind the tape, press the 44REW button.
.
To advance (fast-forward) the tape, press the FF~
button.
Auto eject
When a video cassette without an erasure-prevention tab is
played to the end of the tape, the tape will be automatically
rewound and then the cassette will be ejected.
I
Tracking adjustment
I
~ Auto-tracking adjustment
If the playback picture is disturbed by noise interference press
the ATR button, adjustment to the optimum point will occur
automatically.
@ Manuai tracking adjustment
if the playback picture still shows interference, manually adjust
it with the (+, -) buttons, to minimize the noise.
If you wi6h to return the tracking adjustment to its original
"cantreposition"
after having changed it, press both
CHANNEL (-and
+) buttons on the VCR simultaneously.
Note: The tracking cannot be adjusted while an on-screen
menu is displayed.
Noise interference
(-) ~Cehtre~(+)
9
Advertisement
