Switch Management - Planet XGS-6350-12X8TR Quick Installation Manual

2. Switch Management

To set up the Managed Switch, the user needs to configure the Managed Switch
for network management. The Managed Switch provides two management options:
Out-of-Band Management and In-Band Management.
 Out-of-Band Management
Out-of-band management is the management through console interface.
Generally, the user will use out-of-band management for the initial switch
configuration, or when in-band management is not available.
The Managed Switch is shipped with IP address 192.168.0.254/24
assigned by default. User can assign another IP address to the
Managed Switch via the console interface to be able to remotely
Important
access the Managed Switch through Telnet or HTTP.
 In-Band Management
In-band management refers to the management by logging in to the Managed
Switch using Telnet or HTTP, or using SNMP management software to configure the
Managed Switch. In-band management enables the management of the Managed
Switch to attach some devices to the Switch. The following procedures are required
to enable in-band management:
1. Logon to console
2. Assign/Configure IP address
3. Create a remote login account
4. Enable HTTP or Telnet server on the Managed Switch
In case in-band management fails due to Managed Switch configuration changes,
out-of-band management can be used for configuring and managing the Managed
Switch.
4