Table of Contents
Advertisement
The previous command would apply the following settings for the Managed Switch.
IPv4 Address: 192.168.1.254
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Managed
Switch, please use the procedures as follows:
Show the current IP address
1. On
"Switch#" prompt, enter "show ip interface
2. The screen displays the current IP address, subnet mask and gateway as shown
in Figure 4-5.
If the IP is successfully configured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of Managed Switch
through the new IP address.
If you are not familiar with console command or the related param-
eter, enter "help" anytime in console to get the help description.
Note
8
Figure 4-4 Configuring IPv4 Address Screen
Figure 4-5 Showing IP Information Screen
brief".
Advertisement
Table of Contents
