Table of Contents
Advertisement
Platform: DBALL/DBALL2
Firmware: GM5 Remote Start Ready (RSR) Installation
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
This guide supports the installation of a DBALL in Remote Start Ready (RSR) mode. This solution
offers two (2) configuration options to control your system: RF Kit or SmartStart (both sold separately).
Door lock and transponder interface for many late model Chevrolet, GMC and Hummer vehicles.
Features include door and brake trigger sensing.
Remote Start Ready (RSR) is a function that enables the interface module to remote start the vehicle
completely on its own. Consequently, there is no need for an aftermarket or an OEM remote starter in order to
start the vehicle from a distance.
Important!
This product is NOT compatible with vehicles equipped with a manual transmission.
WARNING:
Door lock function may not operate on older vehicles that do not have the OnStar feature (active or not).
Index
Vehicle Application Guide.............................................................................................................................................
Installation
Wiring Diagram..............................................................................................................................................................
SmartStart/XL202 Installation Notes.............................................................................................................................
Programming
Module Programming....................................................................................................................................................
Module Reset................................................................................................................................................................
Hard Reset....................................................................................................................................................................
Feature & Option List....................................................................................................................................................
Feature Programming...................................................................................................................................................
LED Diagnostics & Troubleshooting..............................................................................................................................
Parking Light Error Codes.............................................................................................................................................
Limited One-Year Consumer Warranty.........................................................................................................................
Quick Reference Guide.................................................................................................................................................
® Buick, Cadillac, Chevrolet, GMC, Isuzu, Oldsmobile, Pontiac and Saturn are registered trademarks and property of their respective companies.
Rev.: 20150626
02
03
04
05
06
06
07
08
09
10
11
12
© 2015 Directed. All rights reserved.
Advertisement
Table of Contents
Related Manuals for Directed Electronics Xpresskit DBALL
Summary of Contents for Directed Electronics Xpresskit DBALL
-
Page 1: Installation Guide
Platform: DBALL/DBALL2 Firmware: GM5 Remote Start Ready (RSR) Installation Rev.: 20150626 Update Alert: Firmware updates are posted on the web on a regular basis. We recommend that you check for firmware and/or install guide updates prior to installing this product. Installation Guide This guide supports the installation of a DBALL in Remote Start Ready (RSR) mode. -
Page 2: Vehicle Application Guide
Platform: DBALL/DBALL2 Firmware: GM5 Remote Start Ready (RSR) Installation Rev.: 20150626 Page 2 Vehicle Application Guide The table below lists the vehicles and features which are compatible with this product. Refer to the following pages for more information on installation wiring, programming and troubleshooting for these vehicles. Vehicles Chevrolet Colorado... -
Page 3: Wiring Diagram
Platform: DBALL/DBALL2 Firmware: GM5 Remote Start Ready (RSR) Installation Rev.: 20150626 Page 3 Wiring Diagram Important! The Hood Pin and Remote Start Safety Override Switch are mandatory safety devices, but are NOT supplied with the DBALL. Green or Black Driver Front Pillar The position of the R. -
Page 4: Smartstart/Xl202 Installation Notes
Platform: DBALL/DBALL2 Firmware: GM5 Remote Start Ready (RSR) Installation Rev.: 20150626 Page 4 SmartStart/XL202 Installation Notes The DBALL Remote Start Ready (RSR) solution offers two (2) configuration options to control your system: RF Kits or SmartStart (both sold separately). This section provides specific installation information for SmartStart and XL202. SmartStart Revision A SmartStart is optional and not included. -
Page 5: Module Programming
Platform: DBALL/DBALL2 Firmware: GM5 Remote Start Ready (RSR) Installation Rev.: 20150626 Page 5 Module Programming Refer to the LED Diagnostics section for more information and for troubleshooting purposes. Important Make all the required connections to the vehicle, as described in the wiring diagram(s) found in this guide, and double check to ensure everything is correct prior to moving onto the next step. -
Page 6: Module Reset
Platform: DBALL/DBALL2 Firmware: GM5 Remote Start Ready (RSR) Installation Rev.: 20150626 Page 6 Position For vehicles equipped with an automatic transmission, put the transmission in “P” Park (P position). Key OUT You can remove the key, the module is now programmed and ready to operate. START You have successfully completed the module programming sequence. -
Page 7: Feature & Option List
Platform: DBALL/DBALL2 Firmware: GM5 Remote Start Ready (RSR) Installation Rev.: 20150626 Page 7 Feature and Option List It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing page on www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the information on this page. -
Page 8: Feature Programming
Platform: DBALL/DBALL2 Firmware: GM5 Remote Start Ready (RSR) Installation Rev.: 20150626 Page 8 Feature Programming Programming Button To enter feature programming routine Turn the ignition ON, then OFF. Within 5 seconds, press and HOLD the programming button until the LED turns ON orange (after 3 seconds). Release the Programming button. -
Page 9: Led Diagnostics & Troubleshooting
Platform: DBALL/DBALL2 Firmware: GM5 Remote Start Ready (RSR) Installation Rev.: 20150626 Page 9 LED Diagnostics and Troubleshooting Status Description Troubleshooting Module Programming If the key was turned to IGNITION: To know if the bus is detected, connect the pink ignition input wire from the black 10-pin connector to (+) 12v. -
Page 10: Parking Light Error Codes
Platform: DBALL/DBALL2 Firmware: GM5 Remote Start Ready (RSR) Installation Rev.: 20150626 Page 10 Status Description Troubleshooting Active Ground While Running Otherwise, the Ground While Running (status) signal GROUND OUT ON (GWR) Flashes green was lost or was never received by the module. Flashes command received. -
Page 11: Limited One-Year Consumer Warranty
Limited One Year Consumer Warranty For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material... -
Page 12: Quick Reference Guide
Quick Reference Guide DBALL/DBALL2-GM5 Remote Start Ready (RSR) Installation Remote Start Ready (RSR) List of Available Commands Remote Start Ready (RSR) is a function that enables the interface Note that the information below is for Viper, Clifford and Python models. Icons and module to remote start the vehicle completely on its own. - Page 13 Quick Reference Guide DBALL/DBALL2-GM5 Remote Start Ready (RSR) Installation SmartStart Compatible Notes This system is compatible with Directed SmartStart 3.0. For a complete list of supported features, please visit www.mysmartstart.com. What is SmartStart? Now you can remote start, lock and unlock your car just by pushing a button on your smartphone;...
Need help?
Do you have a question about the Xpresskit DBALL and is the answer not in the manual?
Questions and answers