Pressing the volume button invokes the mute function, i. the volume is set to a
minimum value. When the mute function is activated, a dot appears in the lower right
corner of the display before the name "Mute".
Pressing the rotary knob again or turning the volume knob will cancel the mute
function and restore the previous volume level.
(9) Display
The Exxceed is equipped with a TFT display, which informs about all settings. The
text colors can be set individually in the "Settings → Color" menu. If you want to
switch off the display completely, you can set this in the menu "Settings → Power
Management".
3.2 Settings
Note: All the descriptions below assume that you have already switched on the
settings menu as described above.
3.2.1 Level
In this menu, you can individually adjust the volume (level) for each input to minimize
volume differences when switching to another input. Since only a lowering of the
levels can be made, the input with the lowest level should be selected as reference.
All other inputs are then tuned to this input.
– Use the input selection switch (1) to select the Level sub-menu
– Press the input selector (1) to enter the company level
– Turn the input selector until you reach the input you want to set.
– Use the volume knob (8) to adjust the level. To be able to compare the level
with the "reference input", use the input selection switch (1) to set this input
again. Proceed with all other inputs.
– To exit the submenu "Level", press the input selector (1) once and return to
the "Settings" menu.
To return to the standard interface and exit from the setup menu, tap the Menu ( 5)
button.
3.2.2 Volume Start
Exxceed
The
has an electronic volume setting. In this submenu, you can adjust
the volume that is set when the
– Use the input selection switch (1) to select the Volume Start submenu
– Press the input selector (1) to enter the Volume Start submenu
– Use the volume knob (8) to adjust the desired startup volume
– Press the input selector (1) again to exit this submenu.
Exxceed
is turned on.
9
Need help?
Do you have a question about the Exxceed and is the answer not in the manual?