Front Panel Controls And Display - Trigon Elektronik Exxceed Manual

3.1 Front Panel Controls and Display

We tried to design the number of control elements according to the formula "as much
as necessary, as little as possible". In addition, it was important to us during the
conceptualization that the amplifier in the basic functions remains as simple to
operate as possible and can be operated intuitively. So everyone will immediately
assign the function of the volume setting to the large right rotary knob (8)
Exxceed
The rotary knob (1) on the left is used to select the inputs and the is
switched on or off with the sensor button (7).
The elements in detail:
(1) Inputselector
This knob selects the input. The selected input is shown in the display (9). The name
of the individual inputs can be set individually. (See also 5.9)
(2) IR-Window
Behind this disc is the infrared remote control receiver.
(3) Headphone jack
A 6.3mm jack plug of a headphone can be plugged into this socket. The impedance
of the headphone should be between 32 and 250 ohms.
If you want to switch off the playback via the loudspeakers while you are using the
headphones, tap the sensor field (4). The LED above the headphone connector lights
up and indicates that the loudspeakers are now switched off.
To reconnect the speakers, tap the sensor field again (4). The LED above the
headphone jack goes out, the volume is reduced to the power-on level, and the
speakers are reconnected.
(4) Sensor Key SPK On/Off
The speakers can be switched on or off at this sensor field. When the loudspeakers
are switched on, a dot on the left before the label "SPK" appears in the lower right
corner of the display (9).
(5) Sensor Key MENUE
Exxceed
The has extensive settings. Touching the MENUE button will take you
to the Settings menu.
7