Page 1
INSTRUCTION MANUAL FOR MONO POWER AMPLIFIER Dwarf Version 1, Juli 2004...
Page 2
Next you have to switch the main cable in the socket (8), and connect it with the 230-volt net. Finally you turn the backbone network switch (9) in direction “Power” and your amplifier DWARF is operating.
Page 3
5a. Input socket: To this socket you connect the exit of the preamplifier. 5b. Output socket: Connect at this socket another DWARF (at his input socket) for Bi-amping. 6. Speaker socket minus: To this socket you connect the minus pole of the speaker cable.
Page 4
Dimensions H x W x D : 59,5mm x 200mm x 330mm Weight : 5.2 kg Warranty : 3 years Manufacturing and Development: Trigon Elektronik GmbH Trigon Elektronik GmbH Trigon Elektronik GmbH Trigon Elektronik GmbH Crumbacher Str. 60 D-34277 Fuldabrück - Bergshausen Tel.
Need help?
Do you have a question about the Dwarf and is the answer not in the manual?
Questions and answers