Table of Contents
Advertisement
7-2. Imaging Problems
Problem
1. The screen is too bright or too dark.
2. Afterimages appear
3. Green/red/blue/white dots or
defective dots remain on the screen.
4. Interference patterns or pressure
marks remain on the screen.
5. Noise appears on the screen.
6. When you switch the power back on
or return from power saving mode,
windows or icons may have shifted
position.
7. (DisplayPort or HDMI input)
The screen colors look strange.
8. The image does not display on the
entire screen.
Possible cause and remedy
• Use "Brightness" in the Setting menu to adjust it (see
(page
16)). The LCD monitor backlight has a limited life span.
If the screen becomes dark or begins to flicker, contact your
local EIZO representative.
• Afterimages are particular to LCD monitors. Avoid displaying
the same image for a long time.
• Use the screen saver or power saving function to avoid
displaying the same image for extended periods of time.
• This is due to LCD panel characteristics and not a malfunction.
• Display a white or black image over the entire screen. The
symptom may disappear.
• When inputting HDCP system signals, normal images may not
be displayed immediately.
• In the "Administrator Settings" menu, set "Compatibility Mode"
to "On" (see
"Compatibility Mode" (page
• Try changing "Input Color Format" in the Setting menu (see
"Input Color Format" (page
• For HDMI signal input, try changing "Signal Format" in the
"Administrator Settings" menu (see
32)).
• Try changing "Picture Expansion" in the Setting menu (see
"Picture Expansion" (page
31)).
14)).
"Signal Format" (page
20)).
Chapter 7 Troubleshooting
"Color"
35
Advertisement
Table of Contents
