Eizo coloredge prominence CG3145 User Manual page 15

Function
Input Range
HDMI Noise
Settings Reduction
Film Detection On
Signal Information
Adjustable
Range
Auto Depending on the external device, the black and white levels
Full in the video signal output to the monitor may be restricted. If
Limited (109 the signal is displayed on the monitor in its restricted form,
% white) the blacks will be faint, the whites dull, and contrast will
Limited be reduced. The brightness range of such signals can be
extended to match the actual contrast ratio of the monitor.
• "Auto"
The monitor automatically recognizes the brightness range of
input signals and displays images appropriately.
• "Full"
The input signal brightness range is not extended.
• "Limited (109 % white)"
The brightness range of the input signal is extended from
16 - 254 (10 bits: 64 - 1019) to 0 - 255 (10 bits: 0 - 1023) for
display.
• "Limited"
The brightness range of the input signal is extended from
16 - 235 (10 bits: 64 - 940) to 0 - 255 (10 bits: 0 - 1023) for
display.
On The small noises that occur in dark areas of an image are
Off reduced. Use this function to reduce noise and roughness in
images.
Note
• This can only be set when there is HDMI input.
• Using the Noise Reduction function may lead to deterioration
of fine images.
When displaying an interlaced signal, a display method can
Off be selected. For video, CG, animation, etc., the 24 fps or 30
fps signal is automatically detected, and the optimal image is
displayed.
Note
• This can only be set when there is HDMI input.
• If the video does not display normally when "Film Detection"
is set to "On", change the setting to "Off".
• "Film Detection" is enabled only when a 1080i signal is input.
- You can check the information for the input signal.
The following information is displayed:
• Resolution
• Vertical scan frequency
• Input range
• Color format
• Color depth
• Colorimetry
• EOTF
Description
Chapter 3 Advanced Adjustments/Settings
15