Eizo coloredge prominence CG3145 User Manual page 32

Function
Picture DisplayPort
Setup
Signal DisplayPort 1
Format DisplayPort 2
HDMI 1
HDMI 2
32
Chapter 5 Administrator Settings
Adjustable
Range
Single To input two separate signals from a single PC into the monitor,
Dual and view the side-by-side on the left and right sides of the screen,
change this setting to "Dual".
For example, if your graphics board does not support a 4K2K
(4096 × 2160) signal output, you can use this setting to display
two 2048 × 2160 side-by-side on a 4K2K screen.
Note
• For a "Dual" display, the signal that is input to DisplayPort 1 is
displayed on the left side of the screen, and the signal that is
input to DisplayPort 2 is displayed on the right side.
• The resolutions that are supported for the "Dual" setting are
shown below.
640×480 / 720×400 / 800×600 / 1024×768 / 1280×960
/ 1280×1024 / 1600×1200 / 1920×1080 / 1920×1200 /
1920×2160 / 2048×2160
• When using "Dual" display, the connector settings of the screen
on the left, such as the Color setting, will be applied.
Ver. 1.1 You can switch the signal type that the monitor can display.
Ver. 1.2 Try changing this setting if the input signal is not displayed, or if
Extra the displayed image does not appear correctly.
4K 30Hz
Note
4K 60Hz
• The default setting for 4K 30Hz and 4K 60Hz Extra is 1920 ×
4K 60Hz Extra
1080.
Description
4096 × 2160
2048 × 2160 2048 × 2160
PC