Table of Contents
Advertisement
●
Rear
9
4. Handle
5. USB downstream port
(supports quick charging)
6. USB downstream port
7. Cable holder
8. Stand
9. Security lock slot
10. Main power switch
11. Power connector
12. Input signal connectors
13. USB upstream port
10
11
This handle is used for transportation.
Attention
• With help from one other person, firmly grasp and hold the monitor by
the bottom while grabbing the handle, and carefully convey the monitor
so as not to drop it.
Connects to a peripheral USB device
Connects to a peripheral USB device.
Covers the monitor cables.
Adjusts the height and angle (swivel) of the monitor.
Complies with Kensington's MicroSaver security system.
Turns the main power on or off.
: On
: Off
Normally, it is not necessary to turn off the main power switch.
Connects the power cord.
The following input connectors are located on the monitor rear in order
of left to right.
HDMI connector 1
HDMI connector 2
DisplayPort connector 1
DisplayPort connector 2
Connects to the USB cable when using software that requires a USB
connection, or when using the USB Hub function
12
13
(page
24).
Chapter 1 Introduction
4
5
6
7
8
(page
38).
9
Advertisement
Table of Contents
