INITIAL ASSEMBLY
Your power chair may require some assembly either before initial use or after transportation. It may also require
disassembly to make some comfort adjustments. Figure 10 details those parts of the power chair that are designed
to be disassembled and assembled by an end user or by a qualified caregiver before using the product or making
comfort adjustments.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or
through your authorized Pride Provider.
ARMREST WIDTH ADJUSTMENT
ARMREST ANGLE ADJUSTMENT
Figure 10. Jazzy 600 Series Assembly View (Standard Seating System Shown)
Jazzy 600 Series
I V . A S S E M B L Y
CONTROLLER POSITION
FOOT PLATFORM ANGLE ADJUSTMENT
SEAT INSTALLATION
www.pridemobility.com
SEAT HEIGHT/ANGLE ADJUSTMENT
FOOT PLATFORM
HEIGHT/DEPTH
ADJUSTMENT
21