Initial Assembly - Pride QUANTUM 1650 Owner's Manual

I V . A S S E M B L Y

INITIAL ASSEMBLY

Your power chair may require some assembly either before initial use or after transportation. It may also require
disassembly to make some comfort adjustments. Figure 9 details those parts of the power chair that are designed
to be disassembled and assembled by an end user or by a qualified carer before using the product or making
comfort adjustments.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or
through your Quantum Rehab Dealer.
SEAT INSTALLATION
ARMREST ADJUSTMENT
CONTROLLER POSITION
FOOT PLATFORM ADJUSTMENT
ANTI-TIP WHEEL ADJUSTMENT
Figure 9. Quantum 1650 Assembly View
22 www.pridemobility.com Quantum 1650